Monroe-electronics Electrostatic Fieldmeter - Static Monitor - model Manuel d'utilisateur télécharger pdf (Page 34)

Section 12

Upgrading the Firmware

From time to time firmware upgrades may be available. With units version 1.03 or higher this

upgrade can be accomplished using the 177A software and obtained via download from our website,

e mail, or CD. Units that are version 1.02 require reprogramming of the processor and cannot be

upgraded via the 177A software. To check the version of your unit read the Channel 2 display at

power up. Note: For the duration of the firmware upgrade (approximately 6 minutes) the instrument

is not functional and the system is not monitoring. If you have any questions regarding firmware

upgrades please contact Monroe Electronics.

To initiate firmware upgrade, click on Update Firmware in the Program Setup drop-down menu. The

following window will appear:

Diagram 1

Clicking on Yes will present the following window:

Clicking on OK will present the following window:

Diagram 2

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 95 96

Pas de commentaire

Monroe-electronics Electrostatic Fieldmeter - Static Monitor - model Manuel d'utilisateur Page 34